Ready Your Garage Door for the Winter

The garage door is the main access point to the home for more than 70 percent of homeowners, and as the Winter weather approaches, it’s important for homeowners to ensure the operation and safety of your household’s main point of entry. First United Door provides some helpful tips to ensure your garage doors are ready for Winter.

Weather Stripping

Check the weather stripping around the garage door to ensure it is keeping out the cold air, and replace any damaged or missing seals.Clean the weather stripping with a good all-purpose cleaner. Lubricate it every 2 or 3 months with a SILICONE-based lubricant. Never use a petroleum-based lubricant on weather stripping as it will dry up and crack. Don’t forget the weather strip between your door panels. It is important to let your weather strip hang 1/2″ below the door base when you readjust your perimeter weather stripping. If the weather stripping is too tight, the door will not function properly. So if your weather stripping has lost its flexibility, it is best to replace it.

Maintaining the Hardware

Older garage doors can malfunction in the cold weather, so garage door maintenance and inspections are even more important during the Winter months. Metal parts of a garage door can contract during cold weather, which can lead to broken springs and other issues.

Homeowners should use a garage door lubricant on any moving parts. Lubricate the rollers, tracks and hinges and all moving hardware parts with a little motor oil (e.g.: 10W30) every three months. Wipe off excess oil with a cloth. As for the springs, use the same oil applied with a cloth. You are not only prolonging the spring’s life, but also reducing the noise the springs make when the door is operated.

Keeping it Clean

Clean your garage door regularly with mild soap, such as car detergent, and a soft bristle brush. Avoid using abrasive cleaners and very strong liquid cleaners which could damage the paint or cause delaminating. If you have a steel garage door, you can revive its luster by applying a car wax as it will protect against acid rain and dust. It is best to avoid waxing in direct sunlight to achieve better results.

Open Sesame: The Garage Door Opener

Depending on the model you own, consult the manufacturer’s guide. If you want to add some white grease on the operator track, again you must first clean the track. By oiling all the mobile parts you will reduce the noise initiated by the motor. If it is still too noisy for your liking, then nylon rollers would help reduce the noise.

Pull on the trolley release cord and operate the door manually. Is it difficult to open and close? The electric operator only replaces manual operation, therefore it must move freely. If you have trouble operating it, contact your local l qualified and licensed garage door installer. For your safety as well as your child’s, check the automatic safety reverse system of the door opener every month.

Get Your Annual Exam

Consider your garage door as an important part of your home. With appropriate annual maintenance, it will operate beautifully.

Ask a qualified and licensed garage door installer to lubricate and adjust your garage door at least yearly. In a 10 step check-up, they will check the following:

– the sturdiness and adjustment of the hinges;
– the rollers for worn-out ball bearings, flattened rollers, and crooked rods;
– the tracks for premature wear and tear, loose bolts, and loose supports;
– the cables for wear and tear; especially near the pulleys and the lower support (corner bracket).

With these helpful tips, homeowners can ensure their garage door is safe, functional and secure well through the winter. 

June is Garage Door Safety Month

Increasing Garage Door Safety Awareness

The International Door Association (IDA) and the Door & Access Systems Manufacturers Association (DASMA) have designated June as Garage Door Safety Month. Both associations and their affiliated manufacturers and dealers will be working to increase awareness of the possible hazards of garage doors and automatic opener systems, and the need for periodic inspection and maintenance to keep them safe.

Just as you want your garage door system to operate properly every time you need it, you also want it to operate safely at all times.

The garage door is typically the largest moving object in your home. Properly maintained and operated, a garage door and its operating system allow you, your family and your vehicles convenient access to and from your home. They also provide security and protect against the elements. Newer, insulated garage doors even help save energy.

But moving garage doors can also cause serious injury, or even death. While there are some garage door system maintenance chores that you yourself can – and should – perform on a regular basis, there are other tasks (including garage door installation and garage door spring replacement) that are best left to the pros.

You and your family should know how to operate and maintain your garage door system safely at all times. You are the key to garage door safety.

Here are 10 things everyone in your household should know about garage door safety. It’s a good idea to review these with everyone in your household from time to time – especially children. The garage door and its operating system are not playthings.

1. The garage door and garage door opener are not toys. They are dangerous if misused, and can cause serious injury or even death.

2. Children should never be allowed to play with the garage door or its operating system. Children should never stand, run or play under or near any garage door, especially when the door is open or moving.

3. Adults should not allow children access to the remote controls or push button wall controls for garage door opener systems; these should be kept out of reach of children. The push button wall control for a garage door operating system should be mounted at least five feet off the floor, out of the reach of children.

4. Never stand or walk under a moving garage door. Never try to enter or exit the garage by racing under a moving garage door.

5. When opening or closing the garage door, always keep the door in view until the door is fully opened or fully closed. Make certain that no adults, children or animals try to enter or exit while the door is closing.

6. Keep fingers and hands away from door sections when the door is opening or closing to avoid injury.

7. Keep your garage door properly maintained to keep it operating safely. Annual maintenance by a trained service technician is recommended. There are other tests and maintenance tasks that you can perform.

8. Remember that your garage door opener uses electricity, which can shock or kill if mishandled. Service should be performed by a trained service technician.

9. Never attempt to repair a garage door’s springs or cables. These are under extreme tension and can cause severe injury or even death. These are best repaired by a trained service technician.

10. If someone has backed into the garage door (yes, it does happen – all of us are in a hurry at one time or another), it’s a good idea to have the door inspected and/or repaired by a trained service technician. Even if the door doesn’t appear to be severely damaged, the operating system may have become misaligned and wear prematurely, creating what could be a dangerous environment.

Although you should provide monthly safety checks and maintenance to your garage door system, an annual visit from a trained door systems technician can keep your door operating safely and smoothly for a long time

Garage Door Check-Ups

At least once a year you should examine the garage door(s) on your property. To insure for proper operation and the longevity of your investment, we recommend that you pay-attention to your garage during daily use. When you find time to do a relatively simple walkthrough, follow these steps:

1. Disengage your opener by means of the emergency release and manually open and close the door. During this time, the garage should operate smoothly without making loud noises. If you can open your garage door with one hand, make sure that it’s not flying up or slamming shut.

2. Check the cables and chain, torsion springs, rollers, and track. As you look at those, also go over the hinges and mounting brackets because sometimes screws come loose.

3. Perform preventative maintenance by having a good lubricant that is made for garage doors. Remember that WD-40 is not a lubricant. With your garage door closed, place a tiny amount at each point on the door where there’s a moving part. When you’re finished, manually open and close the door to work the lubricant in. Don’t forget the bearings on a torsion spring (which is located above the door when closed).

Garage door systems will last about 10-20 years. Like anything else that you use, if there’s high usage and poor maintenance, you can’t expect that your investment will last long. Appropriate care will help to increase the lifespan of your garage door and opener system. If something is wrong when you are performing a walkthrough it is important to repair it promptly. Garage door maintenance is a good way to prevent costlier future repairs. If you have a demanding schedule or cannot perform the maintenance yourself, hire professionals to do it.

A good time for cleaning and some preventative garage door maintenance

On a busy day your garage door may open and close 20 times, so routine maintenance is a must to keep it in good working order. After all, an ounce of prevention is worth a pound of cure. Regular garage door cleaning and maintenance will guarantee a great look and longer life of your door.

Appearance

Clean your garage door regularly with mild soap (like dishwashing detergent) and a soft bristle brush. Avoid using abrasive cleaners and very strong liquid cleaners which could damage the paint or cause delaminating. If you have a steel garage door, you can revive its luster by applying a car wax as it will protect against acid rain and dust. It is best to avoid waxing in direct sunlight to achieve better results. If there’s exposed wood, be sure to paint it.

Exterior Weather-Stripping

Clean the weather stripping around the frame and bottom edge with a good all-purpose cleaner. Lubricate it every 2 or 3 months with a Silicone-based lubricant to keep the stripping pliable. Never use a petroleum-based lubricant on weather-stripping as it will dry up and crack. It is important to let your weather-strip hang 1/2″ below the door base when you readjust your perimeter weather-stripping. If the weather-stripping is too tight, the door will not function properly. So if your weather-stripping has lost its flexibility, it is best to replace it.

Final Advice
Consider your garage door as an important part of your home. With appropriate annual maintenance, it will door will provide carefree convenience for many years to come. Ask a qualified garage door installer, to lubricate and adjust your garage door at least yearly. A check-up will insure he will lubricate all the above mentioned parts and perform any required repairs.

Home buyers want accessible features they can age with

According to U.S. Census data, the number of Americans 65 and older is expected to rise 35 percent from 2010 to 2020. This plays a big part in the upswing of universal design and aging-in-place home features the past few years, accompanying the increase of multigenerational homes. A recent article from The Washington Post cites AARP findings on the subject:

According to AARP, the majority of older Americans want to stay in their homes permanently and live independently. This demographic change translates into demand for residential designs that anticipate changes in health, vision or mobility, and ensures that homes stay safe, comfortable and aesthetically pleasing.

The National Association of Home Builders’ What Home Buyers Really Want report released in 2013 surveyed new and prospective home buyers nationwide to identify which features they want (and don’t want) when looking to purchase a home, one of the most desirable purchases home buyers are making with aging in mind is selecting a garage door 9 ft. or higher to accommodate a raised roof van with wheelchair lift. Besides the accommodation, it’s a good investment as well adding more value to the house itself.

Read Your Garage Door Owner’s Manual!

For those of you who have moved into a new home or have just installed a new garage door, be sure to take the time to thoroughly read the garage door owner’s manual. It may seem like a chore and take time, but one would be surprised at what they can find in most well written garage door manuals. The manual will contain safety and design information to help you insure that your garage door is safe to use and properly installed, and contain information on how to keep your garage door properly maintained.

For example, many garage door manuals will contain helpful tips for painting them. Most companies will tell you to pain BOTH the inside and outside of the garage door to keep everything even, and to never remove any parts of the garage door when painting. If you want to make sure that your garage door is completely covered in a fresh coat of paint, you need to call in a professional to dismantle it so that you can finish the paint job, and then have the garage door installed again. This usually does not happen, but again, do not try to dismantle any of the parts of the garage door. It can lead to a very dangerous situation.

Once you have your garage door installed, it is vital that you periodically lubricate most parts of it. It is often easiest to lubricate the metal parts using silicone spray that can be found at most local hardware stores. However, be sure to never lubricate plastic rollers and plastic idler bearings. It is also suggested that you check for loose nuts and bolts on a monthly basis and if you find something out of the ordinary, call in an expert to help you with your problem. Don’t try anything yourself unless you are licensed and well trained in repairing garage doors.

Also, make sure to check that the door has proper balance by slowly opening the door and making sure that when the bottom of the door is waist high, it does not sway and move in any direction. Finally, using a 2×4 block of wood, make sure that the sensors on your garage works (if it is a remote-controlled door). Place the 2×4 in the pathway of the door and when the door gets somewhat close to the top of the 2×4 it should reverse direction and go back up.

If the garage door is moving, keep your distance and never stand or walk under a moving door. It is important that you set an example for your children and you do not want them under a moving garage door. You should also try to make sure children cannot reach the wall-mounted garage door openers and be sure to hide the remotes. You do not want your children playing with the garage door at all. Finally, if you think you have a problem, call an expert. Never try to fix anything yourself as garage doors are very dangerous and you put yourself in harm’s way when you try to fix it, especially when you don’t know exactly what you are doing.

Garage Door Emergency Release Latch

Well you probably don’t think about the electricity cutting out in your home. If it happens to you, how can you get your garage door open?

No need to worry, there’s a solution to your problem.

Garage Door Openers have an “emergency release latch” mechanism that allows you to operate the garage door manually in the event you lose power.

The carriage is the part of the opener to which the door arm connects. The carriage locks around the opener trolley during normal operation. Once the power comes back on it is necessary to reengage a garage door opener to the door. The process is generally the same among all the garage door opener manufacturers.

To do this:

1. Locate the release mechanism. Somewhere along the track between the motor and the door should be the drive carriage and a release mechanism with a cord hanging down. Usually it will be closer to the door assuming it is closed. If the power is out and your garage is dark, you may need to use a flashlight to help you see.
2. Pull the handle to release the carriage. It may take a little force especially on an older opener that might be stuck. Pull all the way until it stops to be sure it is completely released. If not fully released, attempting to manually open the door could damage the opener.
3. Manually open the garage door. Now the garage door should be able to freely open and close. Be aware that anyone will be able to open the door from outside. You might want to use a latch if this is not a temporary solution.
4. Re-engage the automatic door opener. Once the power has been restored or the opener has been repaired, pull the release cord again to make sure it is fully open. Manually raise or lower the door until the carriage locks into place. Verify that the opener works as expected.

Lifting up a garage door is a trivial action for the majority of us; nonetheless, utilizing the emergency release latch can turn out to be a daunting task for the elderly or the young.  There is an alternative.  A battery-operated power backup is a proven and effective solution; although, it does come at a price.  Essentially, the battery backup is powered by the mains when not in use and kicks in automatically when required.  Due to the fact that it is battery operated, it has a limited number of uses before recharging is required – an important note for those prolonged power outages.

A Guide to Garage Door Openers

Garage doors are no longer the regular roll-top ones, which have to be
pushed up by hand. These days, garage door openers are provided with
various accessories to make opening easier. No matter how heavy the garage
door, it can be fitted with the right kind of opener. These openers ensure
utmost safety and security for garages under any conditions. They are also
provided with several options and in various designs to suit the exact
requirements of the user. The best thing is, they can be installed within 3-5
hours. A professional can install a garage door opener in one hour!

Garage door openers are of two kinds depending on the use: residential and
commercial. In the commercial range of garage door openers, the main
models are: Trolley, Jackshift, Hoist and the Slide models. While Trolley
openers are used for standard lifting on sectional doors, Jackshift is used for
grilles, rolling doors and shutters. Hoist operators are similar to Jackshifts
but they are also suitable for heavy duty industrial doors. The slide door
openers are meant for single and bi-parting slide doors and also for fire
doors.

The main step in purchasing a garage door opener is to determine the actual
drive system. Garage door openers are of three kinds depending on the drive
system: belt driven, chain driven and direct drive. The most important points
to be considered in a garage opener system are the kind of motor and the
horsepower. Garage door openers differ in speed also. The average speed is
7 inches lift/drop per second. There are openers that operate at even double
this speed.

Garage door openers are provided with different kinds of warranties. Safety
is another important aspect while choosing the right garage door opener. It is
mandatory that all automatic door openers should be equipped with a noncontact
invisible beam system that can sense the approach of a person and
make the door to reverse back to the open position. Other mandatory
features of garage openers are: automatic lights, a timed reversing feature,
a manual emergency release cord and a force adjustment feature.

Garage door openers are usually noisy but some advanced models are being
designed to be really quiet. Proper maintenance and lubrication would also
lessen the noise made by garage door openers. On the whole, garage door
openers should be weather resistant, safe, and should have the least wire
exposure for long life.

Garage doors can also be operated by a remote control. This is especially
useful for people who have homes with multiple garages. However, it is
better to have a rolling radio signal code for the control as it is easy for
thieves to capture the code from thin air. Garage door openers can also have
an automatic light, remote control and a wall operator, as well as the option
of single/two/three button transmitters.

Reduce the Noise Coming From Your Garage Door!

Every time the garage door opens and closes, a loud rumble comes right through the walls of your home. Can’t stand it? Here’s some advice to help you reduce noise generated by the up and down movement of your garage door.

1. An insulated garage door can significantly reduce the intrusion of street noise into the home – especially important when there are bedroom or other living areas above or adjacent to the garage. If your door isn’t already insulated, the insulation can be installed by professional installers for a minimal charge, but it is not difficult to mount the insulation yourself and kits are available at your local home improvement retailer. It is important to consider having your springs recalculated because of additional weight to the door.

2. Have the steel rollers on your garage door changed to nylon. With nylon rollers, you will obtain almost silent running on the tracks and there is no need for lubrication.

3. Another point to look at is your electric operator. Any belt-driven model is best because the motor of this model is insulated from the metal case and will cut vibrations. The rubber belt is also quieter than the steel chain.

4. A noise isolator system (semi-rigid rubber 6 mm) can be effective. The supports that hold up the horizontal tracks can be insulated with a piece of rubber to cut the vibrations. On a wood frame, do not fix directly under the beams, place a piece of wood perpendicular under which you will have installed a rubber insulator. If you have a bedroom or living space above your garage and intend to add hardwood flooring, it is recommended to sound proof it by installing carpet and under carpet.

5. A good lifting system (springs) can also contribute to noise reduction. ”Torsion” type springs (instead of ”Extension” springs) is ideal because they allow precise balancing of the door and avoid friction of cables and springs on the horizontal tracks.

6. Concerning the tracks, it is best to choose tracks with the largest radius possible. In fact, the larger the radius the smoother the door action will be. The standard radius is 10 inches (”extension” spring) and 12 or 15 inches (”torsion” spring). Opt for the largest radius possible if you have a big clear space above the door.

7. Finally, regular lubrication (twice a year) of rollers and track is important.

With the above advice, it should easier to reduce noise problems from your garage door. Do not hesitate to call a licensed and insured garage door professional. They are trained to offer you top quality work and service and in the end, peace of mind.

Rate this:

With the cold weather, the following can you save you a lot of time and expense!

Keeping it Clean

Clean your garage door regularly with mild soap, such as car detergent, and a soft bristle brush. Avoid using abrasive cleaners and very strong liquid cleaners which could damage the paint or cause delaminating. If you have a steel garage door, you can revive its luster by applying a car wax as it will protect against acid rain and dust. It is best to avoid waxing in direct sunlight to achieve better results.

Weather Stripping

Clean the weather stripping with a good all-purpose cleaner. Lubricate it every 2 or 3 months with a SILICONE-based lubricant. Never use a petroleum-based lubricant on weather stripping as it will dry up and crack. Don’t forget the weather strip between your door panels. It is important to let your weather strip hang 1/2″ below the door base when you readjust your perimeter weather stripping. If the weather stripping is too tight, the door will not function properly. So if your weather stripping has lost its flexibility, it is best to replace it.

Maintaining the Hardware

Lubricate the rollers, tracks and hinges and all moving hardware parts with a little motor oil (e.g.: 10W30) every three months. Wipe off excess oil with a cloth. As for the springs, use the same oil applied with a cloth. You are not only prolonging the spring’s life, but also reducing the noise the springs make when the door is operated.

At least once a year, home owners must check the following :
1. the sturdiness and adjustment of the hinges;
2. the rollers for worn-out ball bearings, flattened rollers, and crooked rods;
3. the tracks for premature wear and tear, loose bolts, and loose supports;
4. the cables for wear and tear; especially near the pulleys and the lower support (corner bracket).

Open Sesame: The Garage Door Opener

Depending on the model you own, consult the manufacturer’s guide. If you want to add some white grease on the operator track, again you must first clean the track. By oiling all the mobile parts you will reduce the noise initiated by the motor. If it is still too noisy for your liking, then nylon rollers would help reduce the noise.

Pull on the trolley release cord and operate the door manually. Is it difficult to open and close? The electric operator only replaces manual operation, therefore it must move freely. If you have trouble operating it, contact your local l qualified and licensed garage door installer. For your safety as well as your child’s, check the automatic safety reverse system of the door opener every month.

Get Your Annual Exam

Consider your garage door as an important part of your home. With appropriate annual maintenance, it will operate beautifully. Ask a qualified and licensed garage door installer to lubricate and adjust your garage door at least yearly. In a 10 step check-up, they will lubricate all the above mentioned parts and perform any required repairs.