Reduce Noise on Your Garage Door

Is your garage door so noisy with creaks and squeeks that you’re considering making it part of your Halloween decorations?

Or how about every time the garage door opens and closes, a loud rumble comes right through your bedroom floor making things particularly unpleasant for you or friends, relatives occupying your guest bedroom that is probably just above the garage. Can’t stand it? Here’s some advice to help you reduce noise generated by the up and down movement of your garage door.

An insulated garage door can significantly reduce the intrusion of street noise into the home – especially important when there are bedroom or other living areas above or adjacent to the garage. If your door isn’t already insulated, the insulation can be installed by professional installers for a minimal charge, but it is not difficult to mount the insulation yourself and kits are available at your local home improvement retailer. It is important to consider having your springs recalculated because of additional weight to the door.

2. Have the steel rollers on your garage door changed to nylon. With nylon rollers, you will obtain almost silent running on the tracks and there is no need for lubrication.

3. Another point to look at is your electric operator. Any belt-driven model is best because the motor of this model is insulated from the metal case and will cut vibrations. The rubber belt is also quieter than the steel chain.

4. A noise isolator system (semi-rigid rubber 6 mm) can be effective. The supports that hold up the horizontal tracks can be insulated with a piece of rubber to cut the vibrations. On a wood frame, do not fix directly under the beams, place a piece of wood perpendicular under which you will have installed a rubber insulator. If you have a bedroom or living space above your garage and intend to add hardwood flooring, it is recommended to sound proof it by installing carpet and under carpet.

5. A good lifting system (springs) can also contribute to noise reduction. ”Torsion” type springs (instead of ”Extension” springs) is ideal because they allow precise balancing of the door and avoid friction of cables and springs on the horizontal tracks.

6. Concerning the tracks, it is best to choose tracks with the largest radius possible. In fact, the larger the radius the smoother the door action will be. The standard radius is 10 inches (”extension” spring) and 12 or 15 inches (”torsion” spring). Opt for the largest radius possible if you have a big clear space above the door.

7. Finally, regular lubrication (twice a year) of rollers and track is important.

With the above advice, it should easier to reduce noise problems from your garage door. Do not hesitate to call a licensed and insured garage door professional. They are trained to offer you top quality work and service and in the end, peace of mind.

www.firstudt.com; www.garagedoorwownow.com

The Weather is Changing… A Tune-Up of Your Garage Door is Due

With the cooling weather, the following guidelines can you save you a lot of time and expense!

Keeping it Clean

Clean your garage door regularly with mild soap, such as car detergent, and a soft bristle brush. Avoid using abrasive cleaners and very strong liquid cleaners which could damage the paint or cause delaminating. If you have a steel garage door, you can revive its luster by applying a car wax as it will protect against acid rain and dust. It is best to avoid waxing in direct sunlight to achieve better results.

Weather Stripping

Clean the weather stripping with a good all-purpose cleaner. Lubricate it every 2 or 3 months with a SILICONE-based lubricant. Never use a petroleum-based lubricant on weather stripping as it will dry up and crack. Don’t forget the weather strip between your door panels. It is important to let your weather strip hang 1/2″ below the door base when you readjust your perimeter weather stripping. If the weather stripping is too tight, the door will not function properly. So if your weather stripping has lost its flexibility, it is best to replace it.

Maintaining the Hardware

Lubricate the rollers, tracks and hinges and all moving hardware parts with a little motor oil (e.g.: 10W30) every three months. Wipe off excess oil with a cloth. As for the springs, use the same oil applied with a cloth. You are not only prolonging the spring’s life, but also reducing the noise the springs make when the door is operated.

At least once a year, home owners must check the following :
– the sturdiness and adjustment of the hinges;
– the rollers for worn-out ball bearings, flattened rollers, and crooked rods;
– the tracks for premature wear and tear, loose bolts, and loose supports;
– the cables for wear and tear; especially near the pulleys and the lower support (corner bracket).

Open Sesame: The Garage Door Opener

Depending on the model you own, consult the manufacturer’s guide. If you want to add some white grease on the operator track, again you must first clean the track. By oiling all the mobile parts you will reduce the noise initiated by the motor. If it is still too noisy for your liking, then nylon rollers would help reduce the noise.

Pull on the trolley release cord and operate the door manually. Is it difficult to open and close? The electric operator only replaces manual operation, therefore it must move freely. If you have trouble operating it, contact your local l qualified and licensed garage door installer. For your safety as well as your child’s, check the automatic safety reverse system of the door opener every month.

Get Your Annual Exam

Consider your garage door as an important part of your home. With appropriate annual maintenance, it will operate beautifully. Ask a qualified and licensed garage door installer to lubricate and adjust your garage door at least yearly. In a 10 step check-up, he will lubricate all the above mentioned parts and perform any required repairs.

Homemade Garage Door Sensor

How many times have you accidentally left you garage door open all night, revealing all the tools, bikes, and other stuff are available to thieves – who might even enter your home via the door from your garage. It’s not uncommon. But now, there’s a new homemade “Hey dummy, you left your garage door open” reminder system!

At a cost of less than $40 this is a really clever idea.

An open switch activates a small but annoying light in the master bedroom. If the garage door is open, you’ll see it at night when you turn out the lights when you turn into bed. It’s unobtrusive, but extremely functional!

Take a look!